SPECIFICATION
3mm overbore
Cermasteel lined bores
Combustion chambers re-cut for 59mm bore, new squish and bowl
Clinder decks machined to use 'o' rings
Usual porting routine
Barnett carbon fibre clutch plates
Cases blueprinted to square up crank bores and level the cylinder decks
Shifter shaft support boss welded up and reinforced
30.5mm bored carbs
Needle jets bored to P-8 size
5DP5 needles
Lance filters
Darcy pipes
Adjustable powervalve controller
Racetech cartridge emulators
Anti-dive removed
Norian fork brace
GSX-R1100 front rotors
FZR1000 4 piston calipers
Stock front rim widened and increased in diameter from 16"-17"
Stock rear rim widened
Stock swingarm braced
Gifrap rearsets
520 chain and sprockets
Fox twin clicker rear shock |
