Engine Tuning & Development - Performance Parts

All Enquiries mail: mark@suzuki-rg500.com

Home
RG Tuning
Performance Products
Exhaust Development
Project Daytona
RGV500
RG500 For Sale Board
RG500 EZ Board Forum
RGV250 Forum
VIN Identification
dyno results
Mailing List
Magazine Page
List Bikes


Ronny Lundoe

RonnyRG_often.jpg (48541 bytes)

SPECIFICATION

0.5mm overbore
Stan Stephens stage 3 tune
Disc valves cut 12 degrees on closing
Stock needle jets and needles
Lance Gamma filters / 240 mains
Darcy pipes
Maxton tuned forks
Norian fork brace
Ohlins rear shock
Stock front rim widened to 3.5" and increased in diameter to 17"
Stock rear rim widened to 4"
Partly homemade rearsets
520 D.I.D chain and AFAM sprockets

98.7 bhp at the rear wheel

RonnyDarcy.jpg (54814 bytes)

RGDyno001.jpg (55176 bytes)