|
Any information please mail me
mark@suzuki-rg500.com
Tuning includes
transfer and exhaust port work, changing port timings and port areas, Head work, altering
compression ratio and squish, and modifying the disc valve to change intake timing.
For Total Price Add-
£180.00 labour for engine only
£300.00 labour for complete bike
 
Off-Set carburettor
boring to 31.5mm diameter. Oil valve removed modified and replaced.
Increase engine performance
throughout the rev range.
| 31.5mm Carb Boring |
£170.00 |
 
This conversion gives a substantial
power increase throughout the rev range. Includes Engine top end strip and rebuild, Piston
& Ring kit, machining cylinder heads( resetting compression ratio and squish) boring
and restoring port timings.
| 570cc Big Bore Conversion |
£620.00 |
 
| Straight-Cut Primary
Gears |
£300.00 |
| Straight-Cut Gears Fitted to your Basket |
£350.00 |
| Straight-Cut Gears Fitted to your Basket
including Inner and outer oil feed basket mod |
£380.00 |
 
Nova designed gear set with higher ratio 1st gear
and matching kick start/oil pump drive gear. This
is a drop in replacement for the stock RG500 transmission.
| Nova Transmission |
£1468.00 |
 
Give your engine the edge! Full gas
flow of crankcases and barrels.
NB. This service will only be undertaken on an engine which is being tuned.
| Full Engine Gas Flow |
£325.00 |
 
For the ultimate in throttle
response and power. This conversion utilises new billet disc valve covers, set of 4 Mikuni
carbs, crankcase inlet ports modified to match carb inlet area, carb spigot adapters.
| Mikuni TMX35mm Carb Conversion |
£1700.00 |
 
Complete strip and rebuild of the
two crankshafts
New Main bearings, Big ends, Crank seals and Up-rated con-rods
NB. There will be a £35.00 surcharge per crank web, if crank webs are found to be
out of tolerance.
| Crankshaft Reconditioning |
£600.00 |
 
Direct replacement for the standard Metal RV's, These disk
valves offer less rotating mass than the standard valves.
If using with standard Outer covers the Friction material has to be removed and the covers
machined to give proper valve / cover clearance.
| Carbon Rotary Valves (x4) |
£200.00 |
| Carbon Rotary Valves (x4), machine your
Outer RV covers to suit |
£260.00 |
 
These valves flow more fuel than the stock valves to
overcome the problem of high speed lean out due to the stock valves insufficient
flow. These valves also solve the problem of petrol leaking from the carbs due
to the stock valves leaking.
| 4 x High Flow Fuel valves |
£90.00 |
 
A direct replacement for the stock
pick-up, this unit provides an adjustable pickup which allows up to a maximum of 5.5
degree's extra advance to be applied to the stock curve.
| Adjustable Ignition Pick-up |
£110.00 |
 
All Gearbox work undertaken,
complete strip and rebuilds, new bearings etc
mark@suzuki-rg500.com
| 
